FOCUS on YOU Series

Using a plug-and-play software to ensure secure remote management of 3D print runs

The 3D printing process takes time and usually requires the operator to be onsite, to continuously monitoring for failures and job completion. One of...

Concrete 3D printing Course in Ireland could contribute to address the need to build...

Several countries across the world and in Europe have started building 3D printed houses. After careful analysis, experts in Ireland decided to fill this...

How MetShape uses indirect AM process LMM for Medical 3D printing and more.

Founded in 2019, MetShape turned stealth mode off when it secured seed financing from AM Ventures. The fund raising received a lot of hype...

Breast Implant: 3D Printed Scaffold, an alternative to silicone implants?

From a 3D-printed scaffold to new breasts - So far, when we talked about breast implant, we were thinking of a few alternatives that had...

Meet PYLO, a bike helmet equipped with a face shield airbag, a smart 360-degree...

They say it is a bike helmet, but with all the features described below, it could be a great match for football and hockey...

Baker Industries, LEAS and GA-ASI to conduct Wire-Arc Additive Manufacturing Study for the production...

A collaboration between Baker Industries, a Lincoln Electric Company, Lincoln Electric Additive Solutions (LEAS) and General Atomics Aeronautical Systems, Inc. (GA-ASI) will lead to a...

How 3D Printing enables Mattel to support toy research, design, and development of toys

It’s not unusual but it is definitely not systemic yet to see manufacturers producing toys to leverage 3D printing as part of their activities....

Covestro sells its AM business to Sratasys | 3D Systems to acquire DP Polar....

The Additive Manufacturing community was on fire yesterday on social media – as Covestro has announced sale of its Additive Manufacturing business to Stratasys....

Doctors complete 3D Printed Titanium Jaw Transplantation on Cancer Patient

After four years of intensive research by the Netherlands Cancer Institute and the Dutch Mobius 3D Technology (M3DT), a titanium lower jaw was implanted...

Stryker to create 600 new jobs through the opening of a new additive manufacturing...

Stryker, one of the world's leading medical technology companies, today celebrated the official opening of the high-tech facility at Anngrove with a visit from...

A new 3D printing material based on wheat bran.

I am pretty sure we would never get tired of seeing the development of new materials in the 3D printing industry. Furthermore, with the...

SeaBioComp uses Additive Manufacturing and other processes to develop biocomposites products for marine applications

The ultimate goal of the project is to reduce the use of fossil-based materials in the marine sector by developing bio-based composites that have...

Raytheon and Northrop reveal maturation of their Hypersonic Air-breathing Weapon Concept powered by a...

Have you heard about the HAWC – pronounced HAWK – which stands for Hypersonic Air-breathing Weapon Concept? This scramjet powered air-launched hypersonic cruise missile...

Sakuu inaugurates New Battery Printing and Engineering Facility in Silicon Valley

Developer of 3D printed solid-state batteries Sakuu has opened an engineering hub for its battery platform printing initiatives in Silicon Valley. This multi-million dollar...

Multiphoton Optics to become a Heidelberg Instruments branch from January 1st, 2023

Germany-based company Multiphoton Optics GmbH will become a subsidiary of Heidelberg Instruments Mikrotechnik GmbH, after resources have already been pooled in various business areas...

AML3D receives accreditation to 3D print high-value Marine Components.

AML3D has received an Additive Manufacturing Facility accreditation with wire feedstock from DNV, the Marine & Industrial Classification Society. The accreditation encompasses an “Approval of...

Quality Assurance Control | Metrology and Inspection for Additive Manufacturing

Additive Manufacturing is certainly the ideal manufacturing tool to fabricate components that one could not manufacture with conventional manufacturing processes but there is one...

Advanced Tech & Innovation shows hailed as a huge success by attendees and exhibitors

The Advanced Materials Show, Ceramics UK, Battery Cells & Systems Expo and Vehicle Electrification Expo successfully ran at the NEC, Birmingham on the 29th...

Dental family practice reports on how a medical grade 3D printer has helped to...

 Dee for Dentist, a Las Vegas based family practice that provides digital dentistry, has recently acquired a medical grade 3D printer for dentistry – the Primeprint...

Food 3D Printing: SavorEat announces Plant-Based turkey and pork alternatives

New plant-based products are around the corner and they will be brought by Israël-based SavorEat, a food tech company as it ushers in the...

Developing a propulsion system for satellites, using water as a fuel, and 3D printing...

Five years ago, aerospace company Thales was a relatively newcomer in the AM industry – exploring what was possible to do with this technology....

New Process to Create 3D Printed Sensors Could Help Predict Weather, Study Climate Change

Through a newly developed digital process, Massachusetts Institute of Technology (MIT) scientists have created low-cost plasma sensors for orbiting spacecraft. In contrast to the plasma...

The successful launch of “Bolt” Rocket, made with additively manufactured solid propellant technology

Aerospace company X-Bow Systems develops additively manufactured energetics for the solid rocket motor and launch vehicle market. The company also designs and builds a...

Sygnis SA acquires 3D printer manufacturer ZMorph

Polish 3D printer manufacturer ZMorph is one of the first OEMs that drew our attention on the applications 3D printing could enable in the...

How MetShape uses indirect AM process LMM for Medical 3D printing...

Founded in 2019, MetShape turned stealth mode off when it secured seed financing from AM Ventures. The fund raising received a lot of hype...

Nickel Alloy Inconel 625 is the latest Additive Manufacturing material qualified...

Nickel Alloy Inconel 625 is a very trending material especially in applications related to the aerospace, chemical processing, and offshore energy industries. Its is...

A quick look at the Additive Manufacturing process of Heat Exchangers...

OWI Science for Fuels gGmbH, an independent and non-profit research institution, has recently led a three-year project that ambitioned to reform diesel into a...

AWI targets the additive manufacturing industry with a new “Exotic nickel...

Alloy Wire International (AWI), a UK-based company known for developing wire, bars and wire rope in High Performance Exotic Alloys, now ambitions to serve...
X