Additive Manufacturing Solutions Ltd (AMS), a UK-based startup, embarks on a new project that aims to explore the feasibility and practical possibilities of using recycled metallic materials in additive manufacturing (AM).
The Innovate UK-funded project Recycling and Reuse of Aerospace Materials for Additive Manufacturing (R2AM2) will investigate the potential to recycle parts into feedstock for metal AM and the processability and final part performance of recycled AM production.
A similar project is conducted by 6K Additive and Incodema3D that believe that when a certain volume of powder is used, recycling becomes imperative.
The recycling aircraft article by Dan Zhao et al 2021 estimates there are 740 tonnes of non-ferrous (not including aluminium) metals available to recycle each year but only a fraction of that is ever recycled. The project aims to explore a potential environmental step change in the ways materials are used for additive manufacturing.
As our planet is not an endless resource, alongside restrictions in supply and increase in costs due to ongoing conflict, it is more important than ever to look at the ca. 600 tonnes of recycled aircraft parts that could support this growth by providing a lower cost, high quality product. AMS is calling this high value scrap mining and believes if re-usable feedstock is available, it is likely that an alternate to mining can be seen in the UK for the UK market.
CEO and founder of AMS, Robert Higham, said: “The UK was once a leader in AM technology, and we have since seen a stagnation period, with our work alongside the output of this project we aspire to enable a vibrant and highly profitable UK source of feedstock and catalyst for material producing parts for our defence, space, aerospace, and automotive industries. Having Innovate UK support our research and development in this field is a significant and crucial step in our plans as AMS. If we are to continue with our ambitious plans to promote and increase on shore manufacturing, it is crucial we enable a secure and sustainable supply chain of product. This project is the first step in providing valuable data as to the true possibilities of high value circular economy development. We are honoured to be awarded the funding to allow us to take this idea to an industrial feasibility state.”
The project is underway and will end in November 2023. AMS will be using scrap aerospace parts and recycling them into powder which will then be tested and used to manufacture new parts. These new parts will provide the vital data needed to evaluate if this process is effective in providing recycled materials for high quality feedstock for AM in the UK.
Remember, you can post free of charge job opportunities in the AM Industry on 3D ADEPT Media or look for a job via our job board. Make sure to follow us on our social networks and subscribe to our weekly newsletter : Facebook, Twitter, LinkedIn & Instagram ! If you want to be featured in the next issue of our digital magazine or if you hear a story that needs to be heard, make sure to send it to contact@3dadept.com