Our latest articles

©NicolasRodet_Ambiance_020

Five key verticals in the spotlight at 3D PRINT 2026: Automotive, aerospace, medical, defense, and luxury

Kety S. -

TCT Asia 2026: Different world, different rules (Part 2)

Kety S. -

RAPID + TCT 2026 lands in Boston, tapping into a leading hub for AM and Life Sciences

(3DA) -

GE Aerospace invests $1B in U.S. and €110M in European manufacturing

editorialteam -

TCT Asia 2026: Different world, different rules (Part 1)

Kety S. -

Ceramic 3D printing sets a new production standard. XJet shows how one industry at a time

Kety S. -
Image showing 3 manufacturing technologies

NIDEC MACHINE TOOL AMERICA rebrands AM division as Advanced Manufacturing Technologies

editorialteam -

Closing the gap between simulation and manufacturing in Large-Format AM

Kety S. -
Entrance of a tradeshow

JEC World 2026: Additive Manufacturing is in the details

Kety S. -

How CDS uses Claude to demonstrate an autonomous engineering design workflow

Kety S. -
structural component (chair made for a boat) that demonstrates how robotic 3D printing can transform the way boats and large composite structures are designed and built.

JEC 2026: NUGAE demonstrates the capabilities of robotic 3D printing for large marine structures

Kety S. -

Three materials, one goal: Lithoz eyes serial ceramic 3D printing at ceramitec 2026

Martial Y. -
HERMES storefront

Opinion | Does AM increase the value of (luxury) goods?

Kety S. -

How LFAM helps to produce architectural luminaires at architectural scale

(3DA) -

Sintavia develops optimized 3D-printed heat exchanger in two weeks through GPU-accelerated simulation

Martial Y. -
ADDX multi roboat

Composites: Additive, but not “AM” as we know it

Kety S. -
Chamber in composite

Metamorphic AM unveils Rapid Geometry Review for advanced DfAM experts

editorialteam -
3D printed basket from adidas

adidas’s latest 3D printed CLIMACOOL LACED ensures all-round breathability

Kety S. -

Xometry announces new enterprise lead time prediction model.

(3DA) -
Image of how the Interlayer Control System works

Royal3D’s solution to ensure high quality prints throughout the printing process

editorialteam -
Military vehicle

From damage to deployment in 24 Hours: How Cold Spray AM is leveraged for a critical defense infrastructure

editorialteam -

How cybersecurity is quietly deciding who gets to use AM in aerospace and defense

Kety S. -
3D printed teeth

3D Systems expands NextDent Jetted Denture solution

Yosra K. -

The Lego Group, General Atomics and Divergent to deliver keynotes at AMUG 2026

editorialteam -

AM I Navigator vs Leading Minds: What happened since their respective launch

Kety S. -
A group of 4 men on a construction site

Largest investment in 42 Years: Croom Medical scales 3D-printed orthopaedic implant production

(3DA) -
Conflux oil cooler used in a full-distance endurance race on a Multimatic-engineered car

Multimatic Motorsports proves reliability of 3D printed thermal systems on the track. Here is how.

Yosra K. -
L3Harris

L3Harris cuts propulsion component lead times 10× with additive manufacturing.

Martial Y. -
3D printed part produced with Alloyed nickel-based superalloy

A funding from ATI helps accelerate the development of Alloyed’s 3D-printed superalloy for jet engines

editorialteam -
smart, modular, and fully open-source enclosure for 3D printers.

Meet the Clura enclosure, designed to address the invisible problem in the maker’s room

Guest Contributor -
Black executive

Tapping into AI and automation: An AM executive’s perspective for aerospace & defense

Kety S. -

Protolabs’ ProDesk helps manufacturers tap into AI quoting and improved production management

editorialteam -

JEC WORLD 2026 under the motto “Pushing the Limits”

(3DA) -
Helicopter

3D-printed helicopter bracket in recycled titanium cleared for flight

Martial Y. -
One man showing an aircraft prototype to a group of 6 men

Divergent and Mach turn concept into flight-ready prototype in 71 days

Yosra K. -
Symphony Testing

Boom on how to de-risk AM and the technology’s opportunity in supersonic flight’s extreme conditions

Kety S. -
PLX-Benchtop Thin Sample 2

Plastometrex’ new MultiScale capability can address small changes in wall thickness or weld geometry

editorialteam -
Materialise's new personalized PEEK CMF implant

Materialise broadens CMF offering with patient-specific PEEK implants

Kety S. -
Close-up of the additively manufactured titanium deployment spring inside the JPL Additive Compliant Canister (JACC), highlighting the integrated mechanism design made possible by additive manufacturing.

On-orbit deployment by NASA JPL and Proteus Space shows AM simplifies deployable structures

editorialteam -
Foule sur un salon

3D PRINT 2026: The Premier Additive Manufacturing Event in France

(3DA) -

AMIS Runtime targets repetitive build prep tasks in industrial additive manufacturing

Mike Mc Grady -
People gathering around a live demo

JEC 2026: Thermwood will 3D print a matched pair of drone molds live

editorialteam -
Post-processing solution

AM Solutions introduces upgraded version of its post-processing solution M1 Basic

Yosra K. -
Bike part produced using AM

Urwahn pushes the use of AM in its new smart bike factory

Yosra K. -

MakerWorld helps creators fight IP abuse through “Creator Copyright Program”

Yosra K. -

UltiMaker’s Thingiverse becomes a MyMiniFactory company

editorialteam -
Body doubles | Source: Eryn Krueger Mekash/Instagram

The use of 3D printing in “Stranger Things”, season 5

(3DA) -

Newcomer in the AM industry turns stealth mode off with AI software platform

Kety S. -
Osteopore's 3D scaffold tissue

Nationwide adoption: Osteopore deploys 3D printing across Singapore hospitals

Yosra K. -

Spotlight on Perseus Materials whose large-format composite 3D printing expertise is backed up by Lockheed Martin

(3DA) -
A range of parts that were 3D printed using Shapeways’ existing online platform. Image via Shapeways.

The resilience of service platforms in an increasingly consolidated AM ecosystem.

Kety S. -

Events and conferences