The 3D-printed assembly would be the first to be installed on a U.S. submarine
Hunt Valve, a Fairbanks Morse Defense (FMD) company, has been awarded a contract by the Maritime Sustainment Technology and Innovation Consortium (MSTIC) to produce a 3D printed valve assembly for installation on the U.S. Navy submarines, positioning the defense contractor as a first mover in this sector.
By using Additive Manufacturing to create the 70-pound (31kg) valve assembly, Hunt Valve will provide the Navy with a product that meets or exceeds the quality produced through traditional sand-casting in about two-thirds less time.
“The utilization of additive manufacturing assembly with copper-nickel for large valve production is a real step forward for our industry,” said Andrew Pfister, Vice President, Aftermarket and Product Development at Fairbanks Morse Defense. “Not only does it create a superior product in terms of quality, but the process can significantly reduce lead-in times.”
The use of AM for submarine components
So far, AM has been used for small parts and pieces. Applications for challenging alloys such as copper-nickel have been rare.
Sand-casted copper-nickel is highly porous and often results in a high fall-out rate which challenges delivery timeliness. In contrast, valve bodies created through 3D printing have drastically higher first-time yields, which ultimately accelerates the production and delivery timeframe since the manufacturer no longer needs to build in additional production time to account for the fall-out rate.
The expanded utilization of additive manufacturing is expected to speed up the production of components for the Navy fleet by up to 75%. This makes the process an attractive option for increasing production efficiency and gaining greater control over the defense industrial base supply chain, as foundries would be able to focus on larger components.
“Innovative technologies such as additive manufacturing are essential for building the submarine industrial base to overcome supply chain challenges,” Pfister said. “By scaling additive manufacturing, we can reduce shipping from other parts of the world and increase the speed of production at home – which positively impacts the Navy’s overall strategic goal to deliver a 300+ fleet.”
The valve assemblies for this contract are being developed by Hunt Valve in collaboration with Lincoln Electric.
Remember, you can post job opportunities in the AM Industry on 3D ADEPT Media free of charge or look for a job via our job board. Make sure to follow us on our social networks and subscribe to our weekly newsletter : Facebook, Twitter, LinkedIn & Instagram! If you want to be featured in the next issue of our digital magazine or if you hear a story that needs to be heard, make sure to send it to contact@3dadept.com