Skip to content

Stratasys unveils H550 SAF 3D printer for larger production parts

Share this article

LinkedInFacebookXWhatsAppE-mail

3D ADEPT · AUDIO

Listen to this article

4 min

Narrated using a synthetic voice.

Stratasys H550 SAF industrial 3D printer, a grey cabinet with a front viewing window and touchscreen
Stratasys H550. Credit: Stratasys

With a 34.2-liter build volume, the new Stratasys H550 offers twice the build capacity of the company’s H350 printer. The company launched the Stratasys H550 industrial powder bed fusion system at Formnext 2026, together with an automated powder handling station named PowderEase T2.

When a part is too long for the build volume, it has to be redesigned or printed in sections, and the economics of the application change.

The H550 has a 450 mm long axis, which Stratasys claims is 20% longer than the leading comparable print-and-fuse system. The company targets bigger single parts with this extra length: drone components, robotic grippers and other end-of-arm tools, medical devices, car parts, manifolds or ducts.

The same build can also hold hundreds of small parts.

Like the H350, the printer is based on Selective Absorption Fusion (SAF). As a reminder, this technology uses industrial print heads to apply a fusing fluid on a powder bed, then an infrared lamp selectively fuses the particles layer by layer.

The H350 was last upgraded in 2024. As far as cost is concerned, Stratasys says the H550 would cut total cost of ownership by up to 30% compared with any similar print-and-fuse machine on the market, and get parts out faster than comparable SLS systems. The printer would also need less infrastructure and take up less floor space.

What does PowderEase T2 automate?

PowderEase T2 handles breakout, powder recovery, sieving and dosing automatically. A single station can serve up to six H550 systems, provided they all use the same material, and the operator would spend less than 30 minutes per build in total, according to the company.

The station follows the PowderEase TI developed with AM Solutions for the H350, which could also handle up to six printers.

“Longer parts than other print-and-fuse systems, faster than SLS, and at a lower total cost of ownership,” said Neil Hopkinson, VP SAF at Stratasys and inventor of the technology behind SAF.

For Rich Garrity, Chief Business Unit Officer at Stratasys, “Before committing to their next powder bed fusion investment, they should see what the H550 can do.”

I believe PowderEase T2 deserves as much attention as the printer itself: one station serving six H550 systems is what turns a group of printers into a production cell.

Pre-orders opened on November 17, and the printer should be commercially available in Q2 2027. Both systems are on display at the Stratasys booth, Hall 12.1, Booth D129.

THE 3D ADEPT WEEKLY NEWSLETTER

The industry moves fast. Stay ahead.

Every week, the latest additive manufacturing news, in-depth features and real-world applications, straight to your inbox. Plus, be the first to know when a new issue of 3D ADEPT Mag is out.

Free · One email a week · Unsubscribe anytime

Clicking loads our email provider’s sign-up form, including its analytics and Google’s anti-bot protection. You’re only subscribed if you complete the sign-up. Read our privacy policy.

Open the form in a new tab ↗

Share this article

LinkedInFacebookXWhatsAppE-mail

The weekly newsletter

Essential AM knowledge, delivered weekly.

News, in-depth features and industry perspectives, in your inbox.

Receive the newsletter